Rubber Tips for Prong Collars: When to Replace and How to Fit

By K9pro | Published: 2026-10-26

Category: How-to Guides

Learn when to replace prong collar rubber tips and how to fit them properly. Keep your dog comfortable and your collar effective with these simple steps.

Quick Answer

Replace rubber tips on your prong collar when they show cracks, wear, or loss of grip. Fitting them is simple: slide a tip over each prong link and press until it snaps into place.

Why Rubber Tips Matter for Prong Collar Comfort

Prong collars are effective training tools, but the metal links can press hard against your dog's neck. Rubber tips add a soft layer between the metal and skin, reducing discomfort while keeping the collar's corrective action.

Over time, these tips can wear out from regular use, weather, or chewing. Worn tips not only look bad but can also expose sharp metal edges, making the collar less comfortable and potentially causing skin irritation.

Signs You Need to Replace Rubber Tips

Check your rubber tips regularly, especially if you use the collar daily. Look for cracks, splits, or a smooth, shiny surface that indicates loss of grip. If a tip slides off easily or no longer stays in place, it's time for a replacement.

Also, if your dog shows signs of discomfort—like scratching at the collar or avoiding head pressure—worn tips might be the cause. Replacing them restores the cushioning and keeps training sessions positive.

Step-by-Step: Fitting Rubber Tips on a Prong Collar

Inspect the collar: Before fitting new tips, check each prong link for damage or rust. Remove any old, cracked tips and clean the metal with a dry cloth. This ensures a clean surface for the new caps to grip. If the metal itself is bent or corroded, consider replacing the entire collar rather than just the tips.
Position the tip: Hold the rubber cap with the opening facing the prong tip. Align it directly over the pointed end of the link you want to cover. Make sure the cap is straight to avoid uneven pressure. Do not force a cap over a link that is much larger than the opening—this can tear the rubber.
Press and snap into place: Push the cap firmly down over the prong until you hear or feel a soft click. The cap should sit snugly against the base of the link, with no exposed metal. Repeat for the other desired links, using two caps per link as needed. After fitting, gently tug on each cap to confirm it's secure. If it slides, press it in further or try a different cap.

Product Facts

Rubber Tips for Prong Collars: Each set includes 20 rubber caps, enough to cover two links on your collar, and fits small and medium prong collars. This means a single set can refresh the two most-used contact points, giving you a quick and affordable fix without replacing the whole collar.
Rubber Tips for Prong Collars