Herm Sprenger Click Lock Center Plate: Fit and Setup Steps
By K9pro | Published: 2026-11-01
Category: How-to Guides
Replace your prong collar's center plate with the Herm Sprenger Click Lock for easier on/off. Follow these fit and setup steps to get a secure, comfortable fit.
Quick answer
To fit the Herm Sprenger Click Lock Center Plate, remove the existing center plate from your prong collar, attach the Click Lock in its place, and adjust the collar links so the plate sits snugly at the front of your dog's neck. Always check that the buckle closes securely and the collar is not too tight.
Why swap to a Click Lock center plate?
The Click Lock Center Plate replaces the standard center plate on a Herm Sprenger prong collar, converting it to a buckle-style collar that opens and closes with a click. This makes it faster to put on and take off, especially for dogs that are sensitive about having a collar slipped over their head.
The plate is made in Germany by Herm Sprenger and is compatible with all Sprenger warranties. The clasp is stainless steel and the safety cover is saltwater-resistant plastic, so it holds up to regular outdoor use. The buckle has a guaranteed tensile strength of 200 kg, giving you confidence in its security.
Check compatibility with your collar
The Click Lock Center Plate is designed to fit existing Herm Sprenger prong collars. Before you buy, confirm that your collar is a genuine Sprenger model with a removable center plate. If you are unsure, measure the width of your collar's links and compare it to the plate's specifications. The plate is not intended for other brands of prong collars, and using it on a non-Sprenger collar may void warranties or create a safety risk.
Sizing considerations
The Click Lock plate does not change the length of your collar, but it does add a small amount of width at the front. If your dog is between sizes, you may need to remove one or two links to keep the fit snug. Always fit the collar according to the manufacturer's guidelines: it should sit high on the neck, just behind the ears and under the jaw, and be snug enough that it does not slide down, but loose enough that you can fit one finger between the collar and your dog's neck.
Step-by-step installation and fit
- Remove the old center plate: Open the prong collar and locate the center plate that holds the links together at the front. Use pliers to gently squeeze the prongs of the plate together and slide it out of the links. Keep the links in order so you can reassemble them correctly. Work over a table so small parts don't get lost.
- Attach the Click Lock plate: Insert the Click Lock plate into the same position, aligning the holes with the links. The plate should sit flat against the collar. Make sure the clasp opening faces outward so you can easily access it. Check that the plate is fully seated and the links are not twisted.
- Close the buckle and test the lock: Snap the buckle closed until you hear a click. Tug gently on the collar to ensure the lock holds. The safety cover should slide over the clasp to prevent accidental opening. If the buckle does not click securely, do not use the collar until it is fixed.
- Adjust the number of links: With the collar on your dog, check the fit. The collar should sit high on the neck and be snug but not tight. If it is too loose, remove one link at a time until it fits properly. If it is too tight, add a link. Always re-check fit after changing links, and test that the collar does not slip off over the head.
- Final safety check: Before each use, inspect the Click Lock plate for wear or damage, and ensure the safety cover is in place. Replace the plate if the clasp does not close securely or if the plastic cover is cracked. A quick pre-walk check prevents failures.
Product facts
- Herm Sprenger Click Lock Center Plate: Replaces the center plate on an existing prong collar to convert it to an easy-to-open buckle collar. This means you can keep your current collar and simply swap the plate for faster on/off without buying a whole new collar.
Herm Sprenger Click Lock Center Plate
